How to Install StickFitLite Blinds
Stick, clip, admire! Get those gorgeous new StickFitBlinds up in minutes, not hours, with our simple, step-by-step guide.
How do StickFitLite blinds work?
StickFitLite venetian blinds open and close with a pull down handle and the slats tilt using a control wand.
How to Install StickFitLite blinds - Step by step
Alongside your StickFitLite blind, you’ll find an alcohol wipe for cleaning the window prior to install. No screws and no drilling means you don’t need any extra tools!
-
Step 1
Install the headrail
Starting at the headrail, peel off the backing of the adhesive tape and apply to the window glass. Press down for maximum adhesion. Install as close to the edge of the window glass as possible.
-
Step 2
Install the bottom rail
Peel off the backing of the adhesive tape on the bottom rail. Pulling the bottom rail towards you, stretching the cords, then apply to the window glass. Press down for maximum adhesion. Install as close to the edge of the window glass as possible.
The cord tension can be adjusted using the small spring inside the bottom rail.
-
Step 3
Operating your StickFitLite Venetian Blinds
To raise and lower the blinds simply pull up and down using the handle.
Attach the plastic wand by hooking the wand onto the tilt mechanism on the headrail of the blind. Twist the wand to open and close the slats.
